We accept Canadian & US School POs Domestic Shipping Ships across Canada & the US Teacher-reviewed classroom technology
Creality3D

Creality K2 PLUS 3D Printer. FDM Printing. 2nd generation, flagship 3D Printer

Ready Soon! 4 Weeks! Processing: 4 Weeks SKU: 4074
CA$1,959.00
Ready Soon! 4 Weeks!
SKU
4074

Product Description

The Creality K2 Plus is the highest edition in the 2nd generation of K series flagship 3D printers. It offers an ultra-large build volume of 350*350*350mm and features the extruder, a closed-loop motor system, an active chamber heater, etc. And it supports the intelligent CFS unit for multi-color 3D printing and automatic filament backup.

The K2 Plus heatbed adopts an 800W high-power AC heating system with double safeguards. There is an overheating fuse under the heatbed which will automatically disconnect in overheating. There is also a fuse in the machine body. When an unexpected situation occurs, it will disconnect to ensure safety.

K2 Plus has two cameras. One is located close to the nozzle and is used for flow rate and PA (Pressure Advance) calibration. Another is attached to the front frame. It is used for video monitoring and print failure detection.

Key specifications of K2 Plus

  • 350*350*350mm build volume
  • 600mm/s max speed
  • 30000mm/s² max acceleration
  • nozzle temperature up to 350℃
  • heatbed temperature up to 120℃
  • chamber temperature up to 60℃.

CFS (optional)

CFS is an intelligent filament management system. It enables automatic filament loading and unloading in addition to multi-color 3D printing. So, it can save you the troubles of filament replacement. And when the filament backup function is on, if the current filament spool is running out, it can continue by selecting and loading another spool automatically. It also makes a well-sealed drying box that you can store filaments for a long time.

CFS can use any filament spools with a diameter of 197-202mm. Creality paper spools are compatible. CFS supports most filaments such as PLA/PETG /ABS/ASA/PA-CF, but not with flexible filaments such as TPU and damp PVA/BVOH. To print with TPU, you can install it on the standard spool holder of K2 Plus.

Closed Loop Servo Motors

For K2 Plus, all XYZ axis and the extruder are driven by closed-loop servo motors. Unlike an open-loop step motor, the servo motor offers 32768 micro-steps for each revolution. So it achieves high torque, smooth and quick response, and great step accuracy. The average noise at standard speed is within 50 dB. Since the motor is regulated by FOC (Field-oriented Control) based on varying voltages. It will greatly reduce the heat runaway and avoid clogs caused by overheating.

Auto Leveling

K2 Plus uses two optical distance sensors on Z-axis for auto tilt adjustment and a strain gauge in the printhead for auto leveling. So it can ensure accurate leveling with less compensation. The whole process is automated without your attention. Moreover, the aluminum heatbed is 5mm thick and hard to deform, so the leveling accuracy can be well guaranteed.

Key Features

  • Multi-Color Printing Supports Multi-Color Printing With Up to 16 Colors Using 4 CFS
  • Direct Drive Extruder​
  • Tilt Detection
  • FOC Closed-Loop Motors
  • 350 x 350 x 350mm Build Volume
  • Active Chamber Heater

Content

  • K2 Plus 3D Printer

Technical Specifications

Printing Technology
FDM
Build Volume
350*350*350mm
Printer Dimensions
495*515*640mm
Printer with Combo Dimensions
495*515*915mm
Package Dimensions
612*582*725mm
Printer Net Weight
33.5kg
Printer with Combo Net Weight
38.5kg
Printer with Combo Gross Weight
54kg
Printing Speed
≤600mm/s
Acceleration
≤30000mm/s²
Printing Accuracy
100±0.1mm
Layer Height
0.05-0.3mm
Extruder
Dual-gear direct drive extruder
Filament Diameter
1.75mm
Nozzle Diameter
0.4mm(compatible with 0.6/0.8mm)
Nozzle Temperature
≤350℃
Heatbed Temperature
≤120℃
Chamber Temperature
≤60℃
Build Surface
Flexible build plate
Leveling Mode
Anti Tilt auto leveling
XYZE Motor Type
Step-Servo
File Transfer
USB drive, Ethernet, WiFi
Display Screen
4.3" color touch screen
Monitoring AI Camera
Yes
Calibration AI Camera
Yes
Filament Runout Sensor
Yes
Auto Filament Backup
Yes
Filament Tangle Sensor
Yes
Input Shaping
Yes
Air Purifier
Yes
Lighting
Yes
Active Chamber Heater
Yes
RFID Filament
Optional
CFS
Optional
Maximum CFS Connections
≤4
Rated Voltage
100-240V~, 50/60Hz
Rated Power
1200W
Supported Filaments
PLA, PETG, PET, PA, ABS, TPU, ASA, PC, PLA-CF, PA-CF, PET-CF
Printable File Format
G-Code
Slicing Software
Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
File Formats for Slicing
STL, OBJ, AMF
UI Languages
English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese

Reviews

Be the first to review this product! Share your experience and help other educators. Sign in or create an account